Buy 196 - Digital Multimeter, Auto/Manual Ranging, Bargraph, Process Meter

196 - Digital Multimeter, Auto/Manual Ranging, Bargraph, Process Meter

click to zoom

(0 more images)

Product
Our#:	110905
Mfg:	TPI
Mfg#:	196
Availability
In Stock

Description

Files

Specs

Related Links

196 - Digital Multimeter, Auto/Manual Ranging, Bargraph, Process Meter.

The DMM 196 is a hand-held autoranging DMM. The backlit LCD can display three readings at one time. In addition to basic function of AC/DC V, AC/DC A, Ohm, Diode test, continuity, Capacitance, Frequency, there is the adaptor function. The DMM 196 also has RS232 output and software for recording information into a PC.

The DMM 196 also features:
. REC Records Min/Max and Average readings during specified measurement intervals.
. COMP Compare actual reading to preset HI and LOW value for Pass/Fail testing of component.
. HOLD Tow hold system automatically holds the previous stable reading when a new one is obtained.

Product Applications
Perform the following tests and/or measurements with the DMM196 and the appropriate function:

HVAC/R
DC mV . Gas application.
ACA . Heat anticipator current in thermostats.
ACV . Line voltage.
ACV or DCV . Control circuit voltage.
DcuA . Flame safeguard control current.
OHMS . Heating element resistance (continuity).
OHMS . Compressor winding resistance.
OHMS . Contactor and relay coil resistance.
OHMS . Continuity of wiring.
Hz/FREQ . Frequency of line and control voltage.
CAP . Motor start and run capacitance.
REC . Record min/max voltage of controls and line voltages.

ELECTRICAL
ACV . Measure line voltage.
OHMS . Continuity of circuit breakers.
Hz/FREQ . Frequency of line and control voltage.
DCV . Voltage of direct drive DC motors.

ELECTRONIC
ACV . Measure power supply voltage.
OHMS . Continuity of circuit breakers.
REL% . Match components
COMP . Compare readings in circuit or components
Hz/FREQ . Frequency of line and control voltage.

- Large 50,000 count display increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm)
- 0-24mA output for process controls
- Triple Display shows more than one reading simultaneously
- 51 Segment Analog Bar Graph to catch fast AC fluctuations
- Back Light (LED Type) allows viewing in any light condition
- Auto Range automatically selects the best range for the measurement
- Separate battery and fuse compartment for easy replacement
- Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
- Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on.
- Diode Test displays approximate forward bias voltage
- Continuity and buzzer to check for opens and shorts
- Includes battery, test lead set, and protective rubber boot

Tilt stand, and separate battery and fuse compartment are standard features on all 190 seriies DMMs

Description 196 - Digital Multimeter, Auto/Manual Ranging, Bargraph, Process Meter. The DMM 196 is a hand-held autoranging DMM. The backlit LCD can display three readings at one time. In addition to basic function of AC/DC V, AC/DC A, Ohm, Diode test, continuity, Capacitance, Frequency, there is the adaptor function. The DMM 196 also has RS232 output and software for recording information into a PC. The DMM 196 also features:
. REC Records Min/Max and Average readings during specified measurement intervals.
. COMP Compare actual reading to preset HI and LOW value for Pass/Fail testing of component.
. HOLD Tow hold system automatically holds the previous stable reading when a new one is obtained.Product Applications
Perform the following tests and/or measurements with the DMM196 and the appropriate function:

HVAC/R
DC mV . Gas application.
ACA . Heat anticipator current in thermostats.
ACV . Line voltage.
ACV or DCV . Control circuit voltage.
DcuA . Flame safeguard control current.
OHMS . Heating element resistance (continuity).
OHMS . Compressor winding resistance.
OHMS . Contactor and relay coil resistance.
OHMS . Continuity of wiring.
Hz/FREQ . Frequency of line and control voltage.
CAP . Motor start and run capacitance.
REC . Record min/max voltage of controls and line voltages.

ELECTRICAL
ACV . Measure line voltage.
OHMS . Continuity of circuit breakers.
Hz/FREQ . Frequency of line and control voltage.
DCV . Voltage of direct drive DC motors.

ELECTRONIC
ACV . Measure power supply voltage.
OHMS . Continuity of circuit breakers.
REL% . Match components
COMP . Compare readings in circuit or components
Hz/FREQ . Frequency of line and control voltage. - Large 50,000 count display increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm)
- 0-24mA output for process controls
- Triple Display shows more than one reading simultaneously
- 51 Segment Analog Bar Graph to catch fast AC fluctuations
- Back Light (LED Type) allows viewing in any light condition
- Auto Range automatically selects the best range for the measurement
- Separate battery and fuse compartment for easy replacement
- Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
- Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on.
- Diode Test displays approximate forward bias voltage
- Continuity and buzzer to check for opens and shorts
- Includes battery, test lead set, and protective rubber boot